Mycom 2K, Reciprocating compressor, Open, 2 Cylinders
Use this catalogue to identify the spare parts you need to repair your compressor. The OEM catalogue is crossreferenced with our spare parts database, matched items are highlighted. Some of our existing spare parts may not be shown because our database is incomplete (e.g. missing OEM P/N), or because we sell the items separatelly (typical example is the piston-connecting rod assembly). If you have any doubt please ask us.
All OEM manufacturer's names, part numbers, diagrams, products description and information are provided for reference and identification purposes only, and it is not implied that any part listed is the product of the OEM manufacturer.
| Item num. | Ralco P/N | OEM P/N | Description (from OEM manufacturer) | Add | |
|---|---|---|---|---|---|
| 1 | CR00100K02 | Crankcase (2K). | |||
| 2 | CR00209ALK02 | Crankshaft assembly (AL) (2K). | |||
| 3 | DWLCM3X08 | NE3203008 | Spring pin, retainer drive (Φ3x8). | ||
| 4 | KEYMYK000 | CR00400C | Pulley key C (same as model K) (15x9.7x60 rounded at one end). | ||
| 5 | WASMYK060 | CR00500CK | Flat washer, pulley 60. | ||
| 6 | SPGCMW20 | ND320020 | Spring washer, pulley hub set bolt (M20). | ||
| 7 | NB111020050 | Hexagon head bolt, pulley hub (M20x50). | |||
| 8 | CR00800K | Bearing housing (K with Oil pump). | |||
| 8 | HSGMYK010 | CR0089K | Bearing housing assembly with gasket (K with gasket). | ||
| 9 | GKTMYK009 | CR00900K | Gasket, bearing housing (K). | ||
| 10 | NB111010035 | Hexagon head bolt, bearing housing (M10x35). | |||
| 12 | BRGMYK000 | CR01200K | Main bushing (K). | ||
| 13 | DWLCM4X08 | NE3204008 | Main bearing screw (spring pin) (Φ4x8 one side chamfered). | ||
| 22 | VSGMYK010 | NL151C | Oil pressure regulating valve assembly (JO-6220). | ||
| 26 | COVMYK000 | CR77100K | Shaft seal cover (K). | ||
| 27 | GKTMYK027 | CR77200K | Gasket, shaft seal cover (K). | ||
| 28 | NB15508035 | Hexagon head bolt, shaft seal cover (M8x35). | |||
| 29 | WASMYK000 | CR02900K | Thrust washer (K). | ||
| 32 | CR03200FK | Mechanical seal assembly ((FKM)). | |||
| 32 | SELMYK000 | CR03200NK | Mechanical seal assembly ((NBR90)). | ||
| 32 | SELMYK000 | CR03200KH | Mechanical seal assembly ((HNBR)). | ||
| 46 | CR04500K02 | Hand hole cover, without oil sight glass (K). | |||
| 47 | GKTMYK047 | CR04700K | Gasket, hand hole cover (K). | ||
| 48 | NB15510045 | Hexagon head bolt, hand hole cover (M10x45). | |||
| 49 | CR04900K | Head cover (K). | |||
| 50 | CR04900KW | Head cover (water cooled) (K). | |||
| 51 | GKTMYK051 | CR05100K | Gasket, head cover (K). | ||
| 52 | NB15510045 | Hexagon head bolt, head cover (M10x75). | |||
| 53 | CR83202K | Head jacket cover (water cooled) (K). | |||
| 54 | NB15510030 | Hexagon head bolt, head jacket cover (M10x30). | |||
| 55 | GKTMYK055 | CR05500K | Gasket, head jacket cover (water cooled) (K). | ||
| 61 | LNRMYK000 | CR06100K | Cylinder sleeve (K). | ||
| 61-1 | DWLCM3X08 | NE3203008 | Spring pin, cylinder sleeve (Φ3x8). | ||
| 62 | UNLMYK000 | CR06200KL | Cam ring (leftward sloped). | ||
| 65 | RTRMYK020 | CR06500K | Retaining ring (K). | ||
| 68 | PINMYK020 | CR06800K | Lift pin (Φ5x69.3). | ||
| 68 | CR0689K | Lift pin set (K 4pins/set). | |||
| 69 | SPGMYA020 | CR06900A | Spring, lift pin (same as model A). | ||
| 70 | SNPMYK020 | NG13E4 | Stop ring (E-ring), lift pin (E4). | ||
| 71 | VALMYK000 | CR07100K | Suction plate valve (K). | ||
| 72 | SPGMYK000 | CR11600C | Spring, suction plate valve (same as model C, Cone-shaped type). | ||
| 72 | SPGMYK000 | CR0729C | Spring set, suction valve (same as model C). | ||
| 73 | PLTMYK000 | CR07300K | Valve plate (K/R). | ||
| 73 | CR07300NK | Valve plate (K/NH3). | |||
| 73-4 | GKTMYK073 | CR77800K | Gasket, valve plate (K). | ||
| 73-1 | NB111010025 | Hexagon head bolt, valve plate (M10x25). | |||
| 73-3 | PINCMC6X18 | NE2006018 | Parallel pin, valve plate (Φ6x18). | ||
| 75 | NB111008025 | Hexagon head bolt, discharge valve cage (M8x25 -10.9). | |||
| 75-2 | PINCMC6X18 | NE2006018 | Parallel pin, discharge valve cage (Φ6x18). | ||
| 77 | RODMYK000 | CR07800K | Connecting rod assembly (K). | ||
| 78 | RODMYK000 | CR07800K | Hexagon head bolt, connecting rod (K M10x81 Special). | ||
| 78 | BLTMYK000 | CR0789K | Hexagon head bolt set, connecting rod (K). | ||
| 79 | CR07900K | Washer, connecting rod (K). | |||
| 80 | NUTMYK000 | CR08000K | Nut, connecting rod (No.1) (K M10). | ||
| 81 | NUTMYK000 | CR08000K | Nut, connecting rod (No.2) (K M10). | ||
| 84U | CR08400K | Bearing halves (K KP8-3 same as upper and lower). | |||
| 84 | BRGMYK020 | CR0849K | Bearing set (upper and lower) (K). | ||
| 85 | PSTMYK001 | CR08500ALKMH | Piston (AL K). | ||
| 86 | PINMYK000 | CR08600K | Piston pin (K Φ25x73). | ||
| 87 | SNPCMIX025 | NG11025 | Lock spring, piston pin (H25). | ||
| 87 | CR0879C | Lock spring se, piston pin (same as model C). | |||
| 89 | SGMMYK020 | CR08900KGAP | Piston ring (K, GA-P) (1st NH3). | ||
| 89 | SGMMYK020 | CR08900KFCP | Piston ring (K, FC-P) (1st Freon). | ||
| 90 | SGMMYK020 | CR08900KFCP | Piston ring (K, FC-P) (2nd). | ||
| 106 | SGMMYK020 | CR0899K | Piston ring set (K/R). | ||
| 106 | SGMMYK020 | CR0899NK | Piston ring set (K/NH3). | ||
| 108 | PLTMYK010 | CR10809K | Discharge plate valve assembly (K/R). | ||
| 108 | CR10809KN | Discharge plate valve assembly (K/NH3). | |||
| 109 | CAGMYK010 | CR10900K | Discharge plate valve cage (K/R). | ||
| 109 | CR10900NK | Discharge plate valve cage (K/NH3). | |||
| 110 | VALMYK010 | CR11000K | Discharge plate valve (K). | ||
| 111 | SETMYK010 | CR11100K | Discharge valve seat (K). | ||
| 112 | NB15506025 | Hexagon head bolt, discharge valve seat (M6x25). | |||
| 112-2 | CR77900K | Retainer (Turn stopper), hexagon head bolt for discharge valve seat (K t=0.8). | |||
| 115 | PINCMC6X18 | NE2006018 | Parallel pin, discharge valve seat (Φ6x18). | ||
| 116 | SPGMYK000 | CR11600C | Spring, discharge valve (same as model C Corn-shaped type). | ||
| 116 | SPGMYK019 | CR1169C | Discharge valve and spring set (same as model C). | ||
| 118 | NF0104 | Hex head nipple (PT15A). | |||
| 119 | CR12300C20 | Oil strainer (filter) (C #200). | |||
| 119 | SROMYK000 | CR1239C | Oil strainer (filter) assembly (C #200). | ||
| 135 | UNLMYK135 | CR1350K61 | Push rod, unloader device (1) (L=249). | ||
| 142 | SPGMYK122 | CR14200A | Spring, unloader device (A). | ||
| 143 | WASMYK143 | CR14300C | Washer, unloader push rod (C 32x20x3). | ||
| 144 | LCKMYK144 | NG12020 | Stop ring, unloader push rod (S20). | ||
| 145 | UNLMYK145 | CR14500C | Unloader piston (C). | ||
| 146 | CR14600K | Unloader cover built in solenoid valve (K). | |||
| 147 | GKTMYK147 | CR14700K | Gasket, unloader cover (K). | ||
| 149 | NB35408035 | Hexagon socket head cap screw, unloader cover (M8x35). | |||
| 154 | CR15400K2 | Suction filter (2K). | |||
| 161 | CR76600K04 | Safety cover, Suction filter (4K). | |||
| 162 | CR77000K4 | Gasket, suction filter cover (4K). | |||
| 163 | NB15510035 | Hexagon head bolt, suction filter cover (M10x35). | |||
| 164 | CR16400K | Oil sight glass (K2-020-006). | |||
| 165 | CR16400HK | O-ring, oil sight glass (HK (K) CR). | |||
| 167 | BLTCMA6X015 | NB35406015 | Hexagon socket head cap screw, oil sight glass (M6x15). | ||
| 172 | PL0021025N | Gasket, discharge service valve (ATK25A (Compressor side)). | |||
| 173-2 | PL0021025N | Gasket, discharge flange (ATK25A (until 2008)). | |||
| 173-2 | PL0022025N | Gasket, discharge flange (RTK25A (thereafter 2009)). | |||
| 173B | BLTMYA052 | NB15512055S | Hexagon head bolt, discharge flange (M12x55). | ||
| 173N | NC14012 | Hexagon nut, discharge flange (M12). | |||
| 174 | NB15512035 | Hexagon head bolt, discharge service valve (M12x35). | |||
| 182-2 | PL0021032N | Gasket, suction service valve flange (ATK32A (until 2008)). | |||
| 182-2 | PL0022032N | Gasket, suction service valve flange (RTK32A (thereafter 2009)). | |||
| 182B | NB15516060S | Hexagon head bolt, suction service valve flange (M16x60). | |||
| 182N | NC14016 | Hexagon nut (M16). | |||
| 184 | PL0021032N | Gasket, suction service valve (ATK32A (Compressor side)). | |||
| 185 | CR18500TAW | Oil cooler (water cooled) (T-TCF0.15-0609P). | |||
| 185 | OILMYA185 | CR18500TBW | Oil cooler (water cooled) (T-TCF-0.25-0617P). | ||
| 185 | CR18500GA | Gasket, Oil cooler T-TCF cover A. | |||
| 185 | CR18500GB | Gasket, Oil cooler T-TCF cover B. | |||
| 205 | SOLMYL000 | KF711XWM2 | Solenoid valve, unloader (Spolan XWM 240V). | ||
| 208 | NB60012 | Eyebolt (M12). | |||
| 216 | CR21600K04 | Gasket, built-in safety valve cover (4K). | |||
| 217 | CR76600K04 | Cover, built-in safety valve (4K). | |||
| 218 | NB15510040 | Hexagon head bolt, built-in safety valve cover (M10x40). | |||
| 253 | CR8070001 | Gas equalizer. | |||
| 254 | CR8080001 | Packing, gas equalizer (t=1). | |||
| 253B | NB12006030 | Hexagon head bolt, gas equalizer (M6x30). | |||
| 253W | ND42206B | Fastening washer, gas equalizer (M6). | |||
| NI | HTRMYK000 | LF1204220 | Cartridge heater (MKCP-2204). | ||
| NI | CR70700K06 | V-pulley (flywheel) (Type 6K). | |||
| NI | CR7117F2K | Gasket set, F2K. | |||
| NI | GKTMYA235 | CR719001 | Gasket, oval flange (HF20). | ||
| NI | CR70300K | Indentation tools for main bushing (K). | |||
| NI | CR70400K | Disassembling tool set (K). | |||
| NI | ADPMYK000 | NA | ADAPTOR FIT MYCOM *K* /ADAPTER OIL FILTER. | ||
| NI | BLTMYK060 | NA | TORNILLO SUJECION CIGÜEÑAL FIT MYCOM K / BOLT CRANKSHAFT M20X50. | ||
| NI | BRGMYK014 | NA | (56) COJINETE BRONCE INTERNO BOMBA ACEITE FIT MYCOM *K* / INTERNAL BRONZE BEARING OIL PUMP 44.45X38.23X28.7X55.1. | ||
| NI | CARMYK000 | CR0320K | (32) CARBON SELLO PRENSA FIT MYCOM *K* / CARBON RING SHAFT SEAL. | ||
| NI | COVMYK020 | NA | COVER SAFETY VALVE. | ||
| NI | DWLMYK000 | NA | DOWEL CYLINDER LINER FIT MYCOM K. | ||
| NI | FLRMYK000 | FIL295RA | (98A) FINE FILTER ELEMENT FIT *K*. | ||
| NI | GKTMYK059 | NA | JUNTA BOMBACEITE FIT MYCOM *K* / GASKET COVER OIL PUMP. | ||
| NI | GRFMYK010 | NA | OIL CHARGING VALVE FIT MYCOM *K*. | ||
| NI | LCKMYK021 | NA | LOCK CAM RING CYLINDER LINER FIT MYCOM K. | ||
| NI | LNRMYK000 | CR0610K | (61) CAMISA CILINDRO CON DESCRAGADOR FIT MYCOM *K* / CYLINDER LINER + UNLOADING MECHANISM ASSY 85 MM. | ||
| NI | OILMYKREG | NA | OIL PRESSURE REGULATING VALVE FIT MYCOM *K + C*. | ||
| NI | PLTMYK020 | NA | (73) PLATO VALVULAS ASPIRACION + DESCARGA COMPLETO FIT MYCOM *K* / SUCTION & DISCHARGE VALVE PLATE ASSY. ITEMS 71 + 108. | ||
| NI | PMPMYK000 | NA | (56) BOMBA ACEITE ASS. FIT MYCOM *K* / OIL PUMP COMPLETE WITH BEARING HOUSING. | ||
| NI | PMPMYK010 | NA | (56) BOMBA ACEITE SOLO FIT MYCOM *K* / OIL PUMP SERVICE KIT. | ||
| NI | PSTMYK000 | NA | (85) PISTON COMPLETO MYCOM *K* / PISTON ASSY D = 85 MM. | ||
| NI | RODMYK090 | CR0770K | (77) BIELA ACERO COMPLETA FIT MYCOM *K* / CONN. ROD CAST IRON ASSY. WITH HALF BEARINGS. | ||
| NI | RODMYK091 | NA | (77) BIELA ACERO SOLO FIT MYCOM *K* SIN SEMICOJINETES / CONN. ROD CAST IRON W/O HALF BEARINGS. | ||
| NI | SOLMYK000 | NA | UNLOADING SOLENOID VALVE FIT MYCOM *K*. | ||
| NI | SPGMYA142 | CR1420A | (142) MUELLE EJE DESCARGADOR FIT *A+WA+J+WJ*+*K* / UNLOADER ROD SPRING DEVICE 32.3X72. | ||
| NI | SPGMYK060 | NA | MUELLE APRIETE ARANDELA CIGÜEÑAL FIT MYCOM K / SPRING WASHER CRANKSHAFT D=20 MM. | ||
| NI | VSGMYK050 | NA | RELIEF SAFETY VALVE FIT MYCOM *K*. | ||
| NI | VSGMYK214 | NA | NON RETURN VALVE FIT MYCOM *K*. |
5
Shopping cart items